Traction lifts
Modernizations (according to EN81-1)
Pre-wired controller
≤ 11 kW (Open loop)
≤ 7,5 kW (Closed loop)
Dimensions (W x H x D): 595 x 690 x 280 mm
_______________________________________________________________
15 kW (Open loop)
11 – 15 kW (Closed loop)
Dimensions (W x H x D): 595 x 840 x 280 mm
_______________________________________________________________
18,5 – 22 kW
Dimensions (W x H x D): 595 x 1040 x 280 mm
≤ 7,5 kW (Closed loop)
Dimensions (W x H x D): 595 x 690 x 280 mm
_______________________________________________________________15 kW (Open loop)
11 – 15 kW (Closed loop)
Dimensions (W x H x D): 595 x 840 x 280 mm
_______________________________________________________________
18,5 – 22 kW
Dimensions (W x H x D): 595 x 1040 x 280 mm
Screw-terminal controller
≤ 11 kW (Open loop)
≤ 7,5 kW (Closed loop)
Dimensions (W x H x D): 595 x 840 x 280 mm
_______________________________________________________________
15 kW (Open loop)
11 – 15 kW (Closed loop)
Dimensions (W x H x D): 595 x 840 x 280 mm
_______________________________________________________________
18,5 – 22 kW
Dimensions (W x H x D): 595 x 1040 x 280 mm
≤ 7,5 kW (Closed loop)
Dimensions (W x H x D): 595 x 840 x 280 mm
_______________________________________________________________
15 kW (Open loop)
11 – 15 kW (Closed loop)
Dimensions (W x H x D): 595 x 840 x 280 mm
_______________________________________________________________
18,5 – 22 kW
Dimensions (W x H x D): 595 x 1040 x 280 mm
New installations (according to EN81-20)
Machine Room
≤ 7,5 kW
Dimensions (W x H x D): 595 x 840 x 280 mm
_______________________________________________________________
11 – 15 kW
Dimensions (W x H x D): 595 x 1040 x 280 mm
_______________________________________________________________
18,5 – 22 kW
Dimensions (W x H x D): 595 x 1040 x 280 mm
Dimensions (W x H x D): 595 x 840 x 280 mm
_______________________________________________________________
11 – 15 kW
Dimensions (W x H x D): 595 x 1040 x 280 mm
_______________________________________________________________
18,5 – 22 kW
Dimensions (W x H x D): 595 x 1040 x 280 mm
Machine Room Less “All-In-One”
The controller is organized in a single cabinet.
4 – 7,5 kW
Dimensions (W x H x D): 390 x 2000 x 230 mm
_______________________________________________________________
11 – 15 kW
Dimensions (W x H x D): 390 x 2000 x 230 mm
4 – 7,5 kW
Dimensions (W x H x D): 390 x 2000 x 230 mm
_______________________________________________________________
11 – 15 kW
Dimensions (W x H x D): 390 x 2000 x 230 mm
Machine Room Less “Star”
The controller consists of a power module in the shaft and a control module at floor.
4 – 7,5 kW (power module)
Dimensions (W x H x D): 840 x 650 x 280 mm
_______________________________________________________________
11 – 15 kW (power module)
Dimensions (W x H x D): 840 x 650 x 280 mm
_______________________________________________________________
18,5 – 22 kW (power module)
Dimensions (W x H x D): 840 x 650 x 280 mm
_______________________________________________________________
Recessed control module
Dimensions (W x H x D): 118 x 1865 x 87,5 mm
_______________________________________________________________
Surface mounted control module
Dimensions (W x H x D): 120 x 2000 x 110 mm
4 – 7,5 kW (power module)
Dimensions (W x H x D): 840 x 650 x 280 mm
_______________________________________________________________
11 – 15 kW (power module)
Dimensions (W x H x D): 840 x 650 x 280 mm
_______________________________________________________________
18,5 – 22 kW (power module)
Dimensions (W x H x D): 840 x 650 x 280 mm
_______________________________________________________________
Recessed control module
Dimensions (W x H x D): 118 x 1865 x 87,5 mm
_______________________________________________________________Surface mounted control module
Dimensions (W x H x D): 120 x 2000 x 110 mm
Hydraulic lifts
Modernizations (according to EN81-2)
Machine Room
3-wire motors up to 38A
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 595 x 840 x 280 mm
_______________________________________________________________
6-wire motors up to 99A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 595 x 1040 x 280 mm
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 595 x 840 x 280 mm
_______________________________________________________________
6-wire motors up to 99A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 595 x 1040 x 280 mm
Machine Room Less
The controller is not located in a machine room but next to the shaft.
3-wire motors up to 38A
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 590 x 832,5 x 208 mm
3-wire motors up to 38A
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 590 x 832,5 x 208 mm
New installations (according to EN81-20)
Machine Room
3-wire motors up to 38A
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 595 x 840 x 280 mm
_______________________________________________________________
6-wire motors up to 99A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 595 x 1040 x 280 mm
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 595 x 840 x 280 mm
_______________________________________________________________
6-wire motors up to 99A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 595 x 1040 x 280 mm
Machine Room Less
The controller is not located in a machine room but next to the shaft.
3-wire motors up to 38A
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 590 x 832,5 x 234 mm
3-wire motors up to 38A
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 590 x 832,5 x 234 mm
List of features
| FUNCTIONALITY | VVVF | HYDRO | |||
|---|---|---|---|---|---|
| EN81-1 | EN81-20 | EN81-2 | EN81-20 | ||
| BASIC MODULES | |||||
| Gestione freno | X | X | |||
| Gestione porte | X | X | X | X | |
| DTU MR | X | X | X | X | |
| Cavi alimentazione e cavi motore/centralina | X | X | X | X | |
| Citofonia di cabina e pannello al piano | X (*1) | ||||
| Funzioni disponibili sulla PME | Manovra elettrica di emrgenza | X | X | X | X |
| Manovra di soccorso sbilancimanto | X (*2) | ||||
| Test freni | X | ||||
| Test limitatore | X | ||||
| Bypass porte | X | ||||
| OPTIONAL MODULES | |||||
| circ. sicurezza per manovre a porte aperte | X | X | X | X | |
| Protezione UCM | X | X | X | X | |
| Scheda Multiplex | X | X | X | X | |
| Emergenza automatica | X | X | X | X | |
| Protezione EN81-21 | X | ||||
| Citofonia Firefighters | X (*1) | ||||
| CONTEGGIO | |||||
| Cordino | X | X | X | X | |
| Enc. Motore | X | X | |||
| ELGO | X | X | X | X | |
| FAI / FAS | X | X (*3) | |||
