Traction lifts
Modernizations (according to EN81-1)
Pre-wired controller
≤ 11 kW (Open loop)
≤ 7,5 kW (Closed loop)
Dimensions (W x H x D):
600 x 690 x 280 mm
15 kW (Open loop)
11 – 15 kW (Closed loop)
Dimensions (W x H x D):
600 x 840 x 280 mm
18,5 – 22 kW
Dimensions (W x H x D):
600 x 1040 x 280 mm
Screw-terminal controller
≤ 11 kW (Open loop)
≤ 7,5 kW (Closed loop)
Dimensions (W x H x D):
600 x 840 x 280 mm
15 kW (Open loop)
11 – 15 kW (Closed loop)
Dimensions (W x H x D):
600 x 840 x 280 mm
18,5 – 22 kW
Dimensions (W x H x D):
600 x 1040 x 280 mm
New installations (according to EN81-20)
MR EN81-20
The controller is located inside a traditional machine room.
≤ 7,5 kW
Dimensions (W x H x D):
600 x 840 x 280 mm
11 – 15 kW
Dimensions (W x H x D):
600 x 1040 x 280 mm
18,5 – 22 kW
Dimensions (W x H x D):
600 x 1040 x 280 mm
MRL “All-In-One” EN81-20
The controller is organized in a single cabinet.
4 – 7,5 kW
Dimensions (W x H x D):
390 x 2000 x 230 mm
11 – 15 kW
Dimensions (W x H x D):
390 x 2000 x 230 mm
MRL “Star” EN81-20
The controller consists of a power module in the shaft and a control module at floor.
4 – 7,5 kW (power module)
Dimensions (W x H x D):
840 x 650 x 280 mm
11 – 15 kW (power module)
Dimensions (W x H x D):
840 x 650 x 280 mm
18,5 – 22 kW (power module)
Dimensions (W x H x D):
840 x 650 x 280 mm
Recessed control module
Dimensions (W x H x D):
118 x 1865 x 87,5 mm
Surface mounted control module
Dimensions (W x H x D):
120 x 2000 x 110 mm
Hydraulic lifts
Modernizations (according to EN81-2)
MR EN81-2
The controller is located inside a traditional machine room.
3-wire motors up to 38A
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D):
600 x 840 x 280 mm
6-wire motors up to 99A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D):
600 x 1040 x 280 mm
MRL EN81-2
The controller is not located in a machine room but next to the shaft.
3-wire motors up to 38A
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D):
600 x 840 x 210 mm
New installations (according to EN81-20)
MR EN81-20
The controller is located inside a traditional machine room.
3-wire motors up to 38A
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D):
600 x 840 x 280 mm
6-wire motors up to 99A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D):
600 x 1040 x 280 mm
MRL EN81-20
The controller is not located in a machine room but next to the shaft.
3-wire motors up to 38A
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D):
600 x 840 x 240 mm
Traction lifts
Modernizations (according to EN81-1)
≤ 7,5 kW (Closed loop)
Dimensions (W x H x D): 600 x 690 x 280 mm
_______________________________________________________________15 kW (Open loop)
11 – 15 kW (Closed loop)
Dimensions (W x H x D): 600 x 840 x 280 mm
_______________________________________________________________
18,5 – 22 kW
Dimensions (W x H x D): 600 x 1040 x 280 mm
≤ 7,5 kW (Closed loop)
Dimensions (W x H x D): 600 x 840 x 280 mm
_______________________________________________________________
15 kW (Open loop)
11 – 15 kW (Closed loop)
Dimensions (W x H x D): 600 x 840 x 280 mm
_______________________________________________________________
18,5 – 22 kW
Dimensions (W x H x D): 600 x 1040 x 280 mm
New installations (according to EN81-20)
Dimensions (W x H x D): 600 x 840 x 280 mm
_______________________________________________________________
11 – 15 kW
Dimensions (W x H x D): 600 x 1040 x 280 mm
_______________________________________________________________
18,5 – 22 kW
Dimensions (W x H x D): 600 x 1040 x 280 mm
4 – 7,5 kW
Dimensions (W x H x D): 390 x 2000 x 230 mm
_______________________________________________________________
11 – 15 kW
Dimensions (W x H x D): 390 x 2000 x 230 mm
4 – 7,5 kW (power module)
Dimensions (W x H x D): 840 x 650 x 280 mm
_______________________________________________________________
11 – 15 kW (power module)
Dimensions (W x H x D): 840 x 650 x 280 mm
_______________________________________________________________
18,5 – 22 kW (power module)
Dimensions (W x H x D): 840 x 650 x 280 mm
_______________________________________________________________
Recessed control module
Dimensions (W x H x D): 118 x 1865 x 87,5 mm
_______________________________________________________________Surface mounted control module
Dimensions (W x H x D): 120 x 2000 x 110 mm
Hydraulic lifts
Modernizations (according to EN81-2)
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 600 x 840 x 280 mm
_______________________________________________________________
6-wire motors up to 99A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 600 x 1040 x 280 mm
3-wire motors up to 38A
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 600 x 840 x 210 mm
New installations (according to EN81-20)
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 600 x 840 x 280 mm
_______________________________________________________________
6-wire motors up to 99A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 600 x 1040 x 280 mm
3-wire motors up to 38A
– Soft start
– Direct
6-wire motors up to 60A
– Soft start
– Direct
– Star/Delta
Dimensions (W x H x D): 600 x 840 x 240 mm
